Marantz SR6008

The Marantz SR6008 7.2-Channel Home Theater Receiver is an equivalent amount of organization force to be computed with and a sonic masterpiece intended to be the core of the advanced home theater framework. With Marantz’s work of art “star and circle” front presentation, the recipient offers both style and complete elements, including an Ethernet port, seven HDMI sources of info, and playback of the most recent top quality sound organizations.

The SR6008 is outfitted with DTS Neo:X and Audyssey DSX to make a 3D sound space when you set up speakers for the front level or front wide channels. With the expansion of Marantz’s acclaimed Current Feedback and HDAM pre-speaker hardware, you can consume a spotless, rich encompassing sound.

A second HDMI port on this collector permits others to appreciate sound/video or music diversion in a different room while you utilize the framework in the principal room. Two sound/video zones, systems administration, and backing for Bluetooth gadgets make the SR6008 an adaptable answer for home theatre and music listening that is expandable, as well.

Specifications:-

Network Audio-Video Receiver (2013-14)

Dimensions: 440 x 161 x 389mm

Weight: 11.2kg

Tuning range: FM, MW

Power output: 110 watts per channel into 8Ω (stereo)

Surround output: 110W (front), 110W (center), 110W (rear)

Frequency response: 10Hz to 100kHz

Total harmonic distortion: less than 0.08%

Input sensitivity: 2.5mV (MM), 200mV (line)

Signal to noise ratio: 74dB (MM), 100dB (line)

Digital inputs: coaxial, optical, USB, LAN

Video Connections: HDMI, component, composite

A common problem in Marantz SR6008 AV receiver amplifier

Fault:- No audio from any channel.

Solution:- Make the system factory reset by pressing and holding the tuner + and tuner – buttons together in standby condition, and release the two-button when the display starts flashing at the interval of about 1 second. Then follow the instruction on the TV or projector screen, finish all the steps on the screen when complete then try with the input signal through the HDMI cable. Positively, it will work.

If the problem still persists then try to update the firmware through USB which is freely available online.

In case, the problem still persists then check all the input signals like analogue coaxial and optical too. If there is no sound on any kind of signal mode that means the problem is in the HDMI card. Therefore, repairing or replacing should be done by the authorized service Center.

If you found the HDMI card is perfect then the problem is in the preamplifier or main power amplifier section.