Denon DCD-1510AE
The Denon DCD-1510AE elements the equivalent Advanced AL32 Processing of Denon’s fashionable DCD-2010AE. This innovation dramatically upgrades data volume from the CD to create a sound more dedicated to the first. The DCD-1510AE likewise has a USB port for straightforwardly getting digital tracks put away on an iPod or USB memory.
Specifications of Denon DCD-1510AE:
Super Audio CD Player (2010-13)
Dimensions: 434 x 135 x 331mm
Weight: 8kg
Disc format: CD, SACD, MP3
Digital converter: 16-bit linear
Frequency response: 20Hz to 20kHz (CD), 2Hz to 50kHz (SACD)
Dynamic range: 100dB (CD), 113dB (SACD)
Signal to Noise Ratio: 117dB (CD), 117dB (SACD)
Total harmonic distortion: less than 0.0018% (CD), less than 0.001% (SACD)
Line output: 2V
Digital outputs: coaxial, optical
Common faults that occur in Denon DCD-1510AE:
The power does not turn on
Check whether the insertion of the power plug is correct into the power outlet.
This unit is in standby mode. Press the
button on the remote control.
The Auto Standby mode is set. This mode switches the unit to standby mode when the unit is not working for approximately 30 minutes.
Interruption of sound or noise occurs
The sound may skip during playback of a CD-R/CD-RW containing a high-resolution audio source.
Poor recording conditions may cause this, or the disc itself may be of poor quality. Use a correctly recorded disc.
Cannot playback Discs
The disc is dirty. Either clean the disc or insert a different disc.
Discs are not playing back unless the conclusion. Use a wrap-up disc.
Poor recording conditions may cause this, or the disc itself may be of poor quality. Use a correctly recorded disc. Creation of Files in a format that is not supported by this unit. Check the formats supported by this unit.
“ No Disc” is displaying if the disc is loaded upside-down.
“Unsupported” is showing if a disc that cannot be played is loaded.
NO performance of Operations through the remote control unit
Damage to Batteries is there. Replace with new batteries.
Operate the remote control unit within a distance of about 7 m from this unit and at an angle of within 30°.
Operating range of the remote control unit link
Remove any obstacle between this unit and the remote control unit.
Insert the batteries in the proper direction, checking the
and
marks.
There is the exposure of the unit’s remote control to strong light (direct sunlight, inverter-type fluorescent bulb light, etc.). Move the unit to a place in which there is no exposure of the remote control sensor to strong light.
Although using a 3D video device, the remote control unit of this unit may not function due to the effects of infrared communications between units (such as TV and glasses for 3D viewing). In this case, adjust the direction of units with the 3D communications function and their distance to ensure they do not affect operations from the remote control unit of this unit.