DVD-2910

DVD/SACD Video Player (2004-06)

Specifications:-

Dimensions: 434 x 101 x 322mm

Weight: 5.5kg

Disc formats: DVD, CD, VCD, SACD, DVD-A                        

Audio formats: PCM, DD, DTS, MP3

Signal to Noise Ratio: 118dB

Dynamic range: 106dB

Total harmonic distortion: 0.001%

Line output: 2V

Digital Output: Coaxial, Optical

Video Connections: HDMI, DVI, Component, SVHS, Composite, Scart

Common Problems that occur in DENON DVD-1710

Fault:  No power

Solution:  1. Check if the AC power cord is properly connected.
2. Unplug the AC power cord once, and wait for 5-10 seconds and then plug it in again.

Fault:  Picture freezes momentarily during playback

Solution: 1. Check the disc for fingerprints/scratches and clean witha soft cloth wiping from center to edge.
2. Clean the disc.

Fault:  DVD player cannot read CDs/DVDs

Solution:  Use a commonly available CD/DVD cleaner to clean the lens before sending the DVD player for repair

Fault: No DTS sound output

Solution: Use a DIGITAL OUT jack when outputting the DTS sound.

Fault:  Completely distorted picture or black/white picture with DVD

Solution: 1. Connect the DVD player directly to the TV.
2. Make sure the disc is compatible with the DVD player.

Problem: No image from HDMI connection

Solution:  1. Check the HDMI connection. (Check the status of the HDMI related indications.)

2. Check whether the connected monitor equipment or other equipment supports HDCP. (This player will not output a video signal unless the other equipment supports HDCP.)

3. Check the setting of HDMI.

4. Check whether the output format of this player (HDMIFORMAT) matches the supported input format of the other
connected equipment.

HOW TO CONNECT TO A TV WITHOUT AUDIO/VIDEO INPUT JACKS?

If your TV does not have RCA type audio and video input jacks it is still possible to connect this DVD player to your TV’s 75-ohm coaxial antenna terminal using an optional Stereo Audio/Video RF Modulator, not included.

Connect the audio and video outputs of the DVD player to the audio and video inputs on the RF Modulator, and then connect the coaxial output of the RF Modulator (usually marked “TO TV”) to the 75 ohm coaxial antenna termi-nal on your TV. Follow the instruction supplied with the RF Modulator for more details.

If your TV’s 75 ohm coaxial antenna terminal is already occupied by an antenna or cable box connection, remove that cable from your TV’s antenna terminal and reconnect it to the coaxial antenna input terminal of the RF Modulator (usually marked “ANT IN”), then connect the RF modulator to your TV’s antenna terminal as described above.NOTE:• The picture quality from DVD discs will not be as good if the DVD player is connected to the TV’s antenna terminalthrough an RF Modulator.